Appliance Repair

Basic Tips and Guide for Sewing Machine Repair in Boulder


Sewing machine repair is a job that many people are not qualified for. Sewing machines can be complicated and difficult to fix, but the right sewing machine technician will have what it takes to get your machine up and running in no time. In this blog post, we will provide you with basic tips on how to find a good Boulder sewing machine repair technician!

What Are the Most Common Sewing Machine Problems?

There are a number of common sewing machine issues that all sewers should be aware of:

  • When sewing, you will often have thread bunching up under the fabric.
  • Bending or broken needles
  • Fabric not feeding
  • Thread keeps breaking
  • Machine skipping stitches
  • The bobbin tension is not consistent
  • The seams on stretch fabrics may come out wavy and distorted
  • Sewing machine not working
  • Needle comes unthreaded before sewing
  • Fabric or threads are bunching at the start or ends of seams
  • Thread inconsistently knots, loosens, or tangles
  • Thread fraying, shredding, and breaking
  • Fabric feed is inconsistent
  • Machine is making strange noises
  • The machine is running, but the needle won’t move
  • Decorative stitch settings aren’t working
  • Seams are puckered and distorted

Getting a malfunctioning sewing machines fixed can be tricky, but there are ways to ensure the process goes smoothly.

One of the best things you could do is find an expert technicians sewing machine repair in Boulder CO in order to determine what repair and service will need to be made and how long it’ll take before your machine is back up and running again. Another thing you can do is to back up any important sewing machine data or designs.

This way, if something happens to your favorite design when the technician fixes it, then you will be able to get that project completed again! It’s also a good idea to find out what type of warranty they offer and how long it lasts in order for you to know what your risks are.

The last thing you want is the machine breaking again after they have been fixed! If a sewing machine repair services technician can’t offer an extended warranty, then it might be worth looking elsewhere for repair and service since this could save you time and money in the long run if something goes wrong with the repair services process.


Basic sewing machine tune-ups can range from $75 to $100. Replacing a part can cost more than the price of the tune-up, so be sure to ask before you decide.

Computerized embroidery sewing machines usually come with a flat battery or housing issue that will also cost up to $25, on top of any other repairs.

If you are having any kind of sewing machine repair in Boulder CO, it’s best to call the technicians and make an appointment as soon as possible. This will ensure that your problem doesn’t get worse over time or turn into a more expensive issue because of neglect!

Is It Worth It?

Yes! Maintaining your sewing machine will help save you money and get it to last longer. There are a lot of things to look out for during a repair sewing machine, so make sure your technician is qualified.

Lubricating the sewing machines is important because it moves a lot and can get stuck without proper care. It is also very dangerous if you don’t know what you are doing since it can injure your finger.

Should you decide to have your sewing machines undergo routine service, here is the scope of service you will receive:

  • Fluff is often an easy problem to fix, and technicians will start by cleaning all the excess hair from the machine.
  • The needle the bobbin – The needle and bobbin can accumulate dust, which risks causing a jam. This is an easy fix that you should clean periodically to avoid problems.
  • Lubrication – This is important for prolonging the machine’s lifespan.
  • Checking the tension – Tension can dramatically affect stitch quality.
  • The bobbin winder should be checked regularly for wear or damage. If the tire is worn out or cracked, it needs to be replaced immediately.
  • Check for faulty wiring to find a non-responsive machine.
  • Checking the timing – This often requires constant adjustment as problems like broken threads continue to crop up.

What to Bring For Check-up

Aside from your sewing machine, you’ll want to bring the following as well:

  • Foot pedal control
  • Power cord
  • Standard zig-zag presser foot (not a 1/4 inch foot)
  • Correct bobbin

If bringing an sewing machine, be sure to bring an embroidery hoop and the embroidery foot, too.

I Want to Do It Myself, What Can I Do?

If you use your sewing machines frequently, you should perform regular maintenance. Products that are constantly used accumulate dust and lint which leads to poor performance. The quality of the output will have skipped stitches, uneven stitches and broken threads while making a seam.

Care and Maintenance

The care and maintenance of a sewing machine helps to improve its working. This consists mainly of cleaning, oiling, and right handling, which contributes to good output, quality production and safety of the workers.

Care and maintenance is also necessary in order to operate the machine smoothly and for its long term use. It is very important to identify the sewing defects such as upper thread break, bobbin (lower) thread break, bunching of threads, skipped stitches, irregular stitches and stitches that are not formed properly, etc., for proper working of sewing machine and good quality production.

Call for help today if you need something fixed quickly in Boulder, CO or visit for more details.

Vacuums R Us & Sewing Too
3005 28th St
Boulder, CO 80301
(303) 449-8913


Roberta Howarth